58
169
Initial mapping
Bit Function
Value
Bit Function Value
0 LV
1
4 AUX3
16
1 LR
2
5 AUX4
32
2 AUX1
4
6 AUX5
64
3 AUX2
8
7 AUX6
128
These function outputs are active as soon as the decoder is addressed
(without active function key). Thus, for example, the switchover of the sliding
contacts can be realized, in connection with the conditions.
0
– 255
(0)
Notes to par088:
Activation SUSI-pins:
Bit 0 = 0 / bit 4 = do not care / bit 5 = do not care
Activation AUX3/AUX4:
Bit 0 = 1 / bit 4 = do not care / bit 5 = 0
Activation AUX5/AUX6:
Bit 0 = 1 / bit 4 = 1 / bit 5 = 1
10.3
Operation
Put the locomotive on the programming track and readout the locomotive address of the decoder (par002)
.
The ground value should be 1001. Program the desired locomotive address and start running the locomotive keeping
these parameter values. After the first check you can vary the parameters of the engine freely according to your
requirements.
In case your programming device indicates "Error", please check again the correct wiring of the locomotive and pay
attention to the wiring instructions for connecting the programming track. Never put such a locomotive into operation!
Summary of Contents for DH05C
Page 68: ...68 Blank page for your notes...
