Danby Premiere DDR70A1GP, Owner'S Manual

Page: 12 / 27

PROBLEM
POSSffiLE CAUSE
1)
Unit will not operate.
• Check power cord connection.
• Check electrical outlet for blown fuse .
• Check if water
tank
is full if yes, emf.ty).
• Check water
tank
is proper y mstalle .
2) Dehumidifying capacity
(moisture removal) low.
• Air
filter is and/or blocked.
• Poor air ow crrculationlobstruction of front grill.
• Relative humidity in surrounding environment very low.
3) Relative Humidity settinf not
reachep after long period o
operation.
• Check all doors and windows are closed.
• Area/room is too large for the capacity of the
dehumidifier.
CARE AND MAINTENANCE
CLEANING
CAUTION: Before attempting to clean and/or service this unit, always disconnect the
power supply cord from the electrical supply outlet.
1)
DO NOT use oline
1
henezenl paint thinner, or any other chemicals to clean this unit, as these
substances will age/oeform bom plastic components and luster finish.
2) N ver ttempt to cl.ean the unit by pouring war clirec.tly over any of the surface areas, as this will cause
detenoration of electrical components and wmng msulation.
3) Use only a mild dish washing detergent, lukewarm water, and a soft cloth to wipe the exterior surface of the
unit and diy thoroughly.
STORAGE
When the dehumidifer is not being used for long time periods, please follow these instructions:
1)
Disconnect the power cord from the power supply.
2) Empty the water
tank
and wipe (clean) thoroughly.
3) Clean air filter thoroughly.
4) Re-package the unit in the original carton
5) Store the unit upright in a dry location.
TROUBLESHOOTING
Occasionally, you may encounter some problems that are of a minor nature and a service call may not be
necessary. Use this troubleshooting guide to identify possible problems you may be experiencing . If the unit
continues to operate improperly, call your local Danby Service Depot or
1-800-26..Danb.r (1-800-263-2629)
• AmbientAro
=
om temperature too low (below 5°C/41°F).