2
BEFORE PUTTING APPLIANCE INTO USE
• Before connecting the appliance to any electrical power supply, leave it standing (upright) for about 2
hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling.
• Clean the appliance thoroughly, both interior and exterior. (See Cleaning and Maintenance)
WE CARE FOR THE ENVIRONMENT
• Our products use environmentally friendly (recyclable) materials. To this end, individual packaging
materials are clearly identified with a recycling symbol. Always use proper disposal methods.
• When any appliance finally wears out, always use safe and proper disposal methods.
(i.e. use authorized land fill sites only)
TIPS FOR ENERGY SAVINGS
• Try not to open the door too often, especially when the weather is hot and humid. Once you open the
door, close it as soon a s possible.
• Every now and then check the appliance to make sure it is receiving sufficient ventilation.
(adequate air circulation) behind the appliance.
• Set the thermostat from higher to lower settings as soon as possible
(this will depend on loaded conditions and ambient temperatures etc.,)
• Before loading the appliance with fresh foods, make sure they are cooled to ambient room temperature.
(excluding soups)
• If the door gasket is damaged or the door seal is poor, energy efficiency is lost and energy consumption
is substantially higher. To restore energy efficiency, replace the door gasket and/or adjust the door.
IMPORTANT
• This appliance must be connected to a properly "grounded" electrical outlet (see Grounding Instructions)
• If food or beverage has a strange smell or color, throw it away, because it is likely that it has spoiled
and therefore dangerous to consume.
• Always disconnect the appliance from the power supply before cleaning and/or attempting
repairs/servicing.
WARNING:
Repairs should be performed by qualified service personnel only.
• Do not defrost this appliance using other electric appliances (i.e. hair dryer) and never attempt to
scrape/remove ice/frost from the evaporator (cold plate) with sharp objects.
• The rating plate containing Model No/Serial No. and other technical data specific to this unit, is located
on the exterior rear wall of the refrigerator cabinet.
DISPOSAL OF WORN OUT APPLIANCES
• When your appliance finally wears out, dispose of it in a safe and harmless manner. If you have bought
this appliance to replace an old one equipped with a door lock that cannot be opened from the inside,
(lock bolt) make sure the lock is removed, disabled or destroyed before discarding. This will make it
impossible for children to accidentally lock themselves inside the appliance and suffocate.
• The refrigerator system of this appliance is filled with refrigerant and insulating substances which should
be treated and processed separately. Call your nearest service agent or specialized servicing center. If
you are unable to locate one, contact your local authorities for proper disposal instructions. Be careful not
to damage the any of the refrigeration lines of the appliance.
