V3-BT
Danalock V3-BT, Technical Manual v.1.5, May 2017
Page 8
Security for electrical manipulation
The V3-BT is tested compliance to the EMC requirement laid out in the 1999/05/EC
directive. The performance hereof ensures correct operation in the presence of
electromagnetic interference and/or electrostatic discharge. EN 14846 security – electrical
manipulation classification grade=3.
Children
The
V3-BT series and its accessories are not used
to solicit data from or market to
children.
Detailed Safety Information
Exposure to Radio Frequency Signals
The V3-BT unit is a low power radio transmitter and receiver. Periodically the V3-BT
wakes up either due to activity or by a timer. When it is ON, it receives and sends out radio
frequency (RF) signals for a short period of time.
The V3-BT unit is not designed to be worn on a person’s body.
Electronic Devices
Most modern electronic equipment is shielded from RF signals. However, certain
electronic equipment may not be shielded against the RF signals generated by the V3-BT
unit.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of
six (6”) inches be maintained between a handheld wireless phone and a pacemaker to
avoid potential interference with the pacemaker. The following precautions apply:
•
The V3-BT unit is not intended for handheld use or to be worn on the body.
•
It is recommended that a minimum separation of eight 8” inches (20 cm) is to be
maintained between the V3-BT unit and any persons’ body at all times.
•
Do not carry the V3-BT on your person.
Other Medical Devices
If any other personal medical devices are used in the vicinity of a V3-BT unit, consult the
manufacturers of the medical devices to determine if they are adequately shielded from
external RF energy. Physicians may be able to assist in obtaining this information.
The V3-BT unit cannot be turned off after installation;
however, the unit is mostly asleep waiting for either
the wake-up timer or activity on the lock.
