DANALOCKV2-BTZU-X
Danalock DANALOCKV2-BTZU-X, Technical Manual v.1.2, December 2015
Page 6
Qualified Service
Except for batteries, the DANALOCKV2-BTZU-X contains no user serviceable or
replaceable parts. Non-functioning units must be returned to an authorized service center
for repair or replacement.
Accessories and Batteries
Use only approved accessories or batteries. Do not connect incompatible products.
There is risk of explosion or fire if an incorrect type replacement battery contacts are
shorted. Do not exceed the temperature ranges or other environmental conditions
specified by the battery manufacturer. Dispose of used batteries according to the
instructions provided with the batteries.
Electro mechanical lock classification
The following statements are related to the European norm EN 14846 for building
hardware – electromechanically operated locks and striking plates. The DANALOCKV2-
BTZU-X is classified according to this standard with the below declarations and
precautions.
Category of use
The DANALOCKV2-BTZU-X can be used in areas with medium frequency of use by
people with some incentive to exercise care but where there is some chance of misuse,
e.g. internal office doors or internal residential doors. EN 14846 category of use
classification grade=0.
Durability, door mass and closing force and security (Physical attack)
The type of door i.e. mass and closing force, durability for dead bolt or latch bolt
operations and security for physical attacks are not applicable to DANALOCKV2-BTZU-X.
The DANALOCKV2-BTZU-X lock is not in any case related to the door or striking plate
already existing on the door where DANALOCKV2-BTZU-X is mounted. It is however
recommended to verify the operation of the DANALOCKV2-BTZU-X after mounting the
product. Poly-Control ApS is not liable for the classification of the door and striking plate in
relation to the mounting of the DANALOCKV2-BTZU-X. EN 14846 classifications N/A are
used.
Fire doors
The DANALOCKV2-BTZU-X series is not approved for use with fire doors. EN 14846
suitability for use on fire/smoke doors classification grade=0.
Safety
No requirements are defined in the EN 14846 classification scheme.
Water-Resistance
The DANALOCKV2-BTZU-X series is not water-resistant. The lock must therefore be
installed on the inside of the door where it is dry and not subjected to either water streams
or submersion. EN 14846 corrosion resistance classification grade=0.
Security for electrical functions
The DANALOCKV2-BTZU-X has no indications, sound alarms in case of a lock
malfunction. EN 14846 security – electrical function classification grade=0.
