DANALOCKV2-BTZU-X
Danalock DANALOCKV2-BTZU-X, Technical Manual v.1.2, December 2015
Page 13
Troubleshooting
Various error situations are listed below along with some possible solutions.
Error
Error description
Possible solutions
Grey key in
keychain
The key in the
keychain turns grey
when the lock is
unreachable
1. Remove the App from the background or close it entirely
2. Turn off Bluetooth on the phone
3. Turn on Bluetooth on the phone
4. Restart the App
Lock cannot be
added to the
gateway
The lock cannot be
added to the gateway
1. Exclude the lock from the gateway
2. Re-include the lock to the gateway
Auto unlock
stopped working
Auto unlock stopped
working because other
devices have been
paired
1. Turn off Bluetooth on the phone
2. Turn on Bluetooth on the phone
Notice
that you might experience interference from other
Bluetooth devices. Apple products will typically be ranked
higher than other Bluetooth devices.
Electro mechanical lock classification
The DANALOCKV2-BTZU-X is categorized as an electro mechanical lock for operation on
the inside of a door instead of a pure mechanical wrings. The locks incorporates an
electromechanically operated motor for opening and closing the door based on either a
finger press (from the inside) or a secure locking/unlocking command transmitted over a
radio communication interface.
The DANALOCKV2-BTZU-X is designed for installation and use to the following electro
mechanical lock classification standard EN 14846. (N/A is Not Applicable for
DANALOCKV2-BTZU-X as these classifications are dependent of the actual door and
striking plate where DANALOCKV2-BTZU-X is mounted):
Listed from left to right (Category of use, Durability, door mass and closing force,
Suitability for use on fire/smoke doors, Safety, Corrosion Resistance, Security, Security –
electrical function, Security – electrical manipulation).