Danaher Motion SuperDrive ACS24 Series, User Manual

Page: 7 / 99

26.04.2005 Introduction
1 INTRODUCTION
1.1 A
BOUT
AC S
UPER
D
RIVE DOCUMENTATION
1.1.1 T
HIS VERSION
This version replaces all previous versions of this document. Danaher Motion Stockholm AB has
made every effort to insure this document is complete and accurate at the time of printing. In
accordance with our policy of continuing product improvement, all data in this document is
subject to change or correction without prior notice.
1.1.2 C
OPYRIGHT
This manual is copyrighted 2005 by Danaher Motion Stockholm AB. All rights reserved. This
manual may not be copied in whole or in part, nor transferred to any other media or language,
without the express written permission of Danaher Motion Stockholm AB.
1.1.3 S
COPE
This manual presents instructions, guidelines, diagram and other information relevant for
installation and maintaining the AC SuperDrive in an electrically powered vehicle utilizing the
CAN Bus and CANopen protocol for communications and control.
1.1.4 W
ARNING
,
CAUTION AND INFORMATION NOTICES
Special attention must be paid to the information presented in warning, caution and information
notices when they appear in this manual. Examples of caution, warning and information notices
along with an explanation of their purposes follow.
WARNING
♦
A Warning informs the user of a hazard or potential hazard that could
result in serious of fatal injury if the precautions or instructions given in
the warning notice are not observed.
CAUTION
♦
A Caution informs the user of a hazard or potential hazard that could
result in injury or damage to the equipment if the precautions or
instructions given in the caution notice are not observed.
i
An Information
B
ox contains supplemental information or references to
supplemental information on a topic.
Stop Box highlights important conceptual or procedural details that
must be understood and applied in order to successfully use the
product.
User's Guide 1.0 Item No.
89Y05120A 7