Danaher Motion Standalone MMC, Hardware Manual, Page: 93 / 182

Standalone MMC Hardware Manual 93
Danaher Motion
version 15.1
Standalone MMC Control
Axis Port DC Outputs
Number of outputs 2 outputs per axis
Configuration
Each set of axis outputs can be configured as sourcing or
sinking.
Maximum current 100 mA per output
Voltage range 24 VDC nominal, 5 to 30 VDC range
Scan loss response Outputs turn off
Aux Port +5 Vdc Output
+5 VDC
150 mA maximum current available. Connections to this
point should be over short distances and away from electric
noise signals.
SERCOS Motion Board
SERCOS Interface
Interfaces with one ring (MMC-S8) or two rings (MMC-S16)
with from one to eight Sercos drives per ring
SERCOS port
SMA female connectors for interfacing to 1000 µ meter plas-
tic fiber optic cable with SMA male connectors.
Fiber optic receiver specifications:
Peak input power (optical level low) -31.2dBm max
Peak input power (optical level high) -20.0 dBm min,
0.0dBm max
Fiber optic transmitter specifications:
Peak output power (optical level high) is -10.5 dBm min,
-5.5 dBm max
Update loader port RS232 interface
SERCOS Cable
Type Plastic with step index profile (POF)
Core diameter
Fiber diameter 980 µm ±60 µm
1000 µm ±60 µm
Operating temperature 0° C to 55° C (32° F to 131° F)
Minimum bend radius
One time: 30 mm
Continuous: 80 mm
Tensile strength
One time: 250 N
Continuous: 100 N
Connectors SMA style male