TSM-0064 - TE27/32 4-Speed LD with Full Flow Control Valve Service Manual
Dana Holding Corporation
4
Pressure and Temperature Specifications
Pressure and Temperature Specifications
Normal Operating
Temperature
158–248ºF / 70–120ºC
Measured at temperature check port converter out
(port 71 or port 32
*
)
*
Refer to “TROUBLESHOOTING” for check port identification.
Maximum Temperature
248ºF / 120ºC
Regulator Pressure
†
† All pressures and flows to be measured with oil temperature 180-200
º
F / 82-93
º
C.
Vehicle in Neutral & Port 31
*
At 600 RPM minimum: 326.3 PSI / 22.5 bar minimum
At 2650 RPM: 369.8 PSI / 25.5 bar maximum
Pump Flow
†
At 1900RPM
31.5 GPM / 119.3 l/min minimum
Lube Pump Flow
At 2170 RPM selective lube
12.5 GPM / 47.2 l/min minimum
Clutch Pressure
†
1st clutch: Port 41
*
2nd clutch: Port 42
*
3rd clutch: Port 43
*
4th clutch: Port 44
*
Forward clutch: Port 45
*
Reverse clutch: Port 46
*
At 2200 RPM:
297.3 PSI / 20.5 bar minimum with 1st clutch activated
Filter Bypass Valve
†
Set at 59.4-65.2 PSI / 4.1-4.5 bar
†
Lube Pressure
†
Port 34
58–80 PSI / 4.0–5.5 bar
at 2200 RPM
Internal Total Leakage
At 1000 engine RPM
FWD/REV: 1 GPM [4 l/min.] maximum
1st: 2.43 GPM [9.2 l/min.] maximum
2nd-3rd-4th: 1 GPM [4 l/min.] maximum
Converter: 1.3–3.2 GPM [5–12 l/min.] at 1000 RPM
Safety Valve
Cracking Pressure
†
127.6–139.2 PSI / 8.8–9.6 bar
Converter Out Pressure
†
Port 33
72.5 PSI / 5 bar minimum
2000 RPM and maximum 123.3 PSI / 8.5 bar
at no load governed speed
Summary of Contents for SPICER TE27
Page 2: ......
