TSM-0064 - TE27/32 4-Speed LD with Full Flow Control Valve Service Manual
Dana Holding Corporation
2
INTRODUCTION
Foreword
This manual has been prepared to provide the customer and maintenance personnel with information and instructions
on the maintenance and repair of Dana Spicer products.
Extreme care has been exercised in the design, selection of materials, and manufacturing of these units. The slight out-
lay in personal attention and cost required to provide regular and proper lubrication, inspection at stated intervals, and
adjustments as indicated will be reimbursed many times in low cost operation and trouble-free service.
In order to become familiar with the various parts of the product, its principle of operation, troubleshooting, and adjust-
ments, it is urged that mechanics study the instructions in this manual carefully and use it as a reference when perform-
ing maintenance and repair operations.
Whenever repair or replacement of component parts is required, only Dana Spicer approved parts, as listed in the appli-
cable service parts list, should be used. Use of “will fit” or non-approved parts may endanger proper operation and per-
formance of the equipment. Dana does not warrant repair, replacement parts, or failures resulting from the use of parts
which are not supplied or approved by Dana.
IMPORTANT:
ALWAYS FURNISH THE DISTRIBUTOR WITH THE SERIAL AND MODEL NUMBER WHEN ORDERING PARTS.
Safety Precautions
To reduce the chance of personal injury and/or property damage, the following instructions must be carefully observed.
Proper service and repair are important to the safety of the service technician and the safe, reliable operation of the
machine. If replacement parts are required, the part must be replaced with a Dana specified replacement part. NEVER
use a replacement part of lesser quality.
The service procedures recommended in this manual are effective methods of performing service and repair. Some of
these procedures require the use of unique tools. Accordingly, anyone who intends to use a replacement part, service
procedure, or tool, which is not recommended, must first determine that neither their safety or the safe operation of the
machine will be jeopardized by the replacement part, service procedure, or tool selected.
It is important to note that this manual contains various precautions that must be carefully observed in order to reduce
the risk of personal injury during service or repair. Improper service or repair may also damage the unit or render it
unsafe. It is important to understand that these precautions are not exhaustive. It is impossible to warn of all possible
hazardous consequences that may result from following or failing to follow these instructions.
Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which,
if not avoided, may result in moderate or minor injury.
Indicates a situation which, if not avoided, may result
in damage to components.
DANGER
WARNING
CAUTION
NOTICE
Summary of Contents for SPICER TE27
Page 2: ......
