TSM-0064 - TE27/32 4-Speed LD with Full Flow Control Valve Service Manual
Dana Holding Corporation
8
Automatic Calibration Procedure
Automatic Calibration Procedure
Introduction
The APC200 firmware contains an automatic transmission calibration procedure, which is able to optimize the shift
quality of the transmission.
An automatic calibration has to be done:
•
When the vehicle is build at the OEM
•
Every 2000 hours of transmission operation
•
When an overhaul of the transmission is done
•
When the transmission is repaired
•
When the APC200 is replaced
ENTERING AUTOMATIC CALIBRATION MODE
The automatic calibration mode is entered by pressing the S-button on the APC200 display for 15 seconds during
power-up.
Summary of Contents for SPICER TE27
Page 2: ......
