Dugan-MY16 User Guide
26
Naming Units and Channels
Connected units are displayed in the top pane in alphabetical order. To display them
in your own order, use names with number prefixes.
To name a unit and its channels:
1.
Select a unit in the top pane.
2.
Select the yellow text in the right pane (under the Dugan logo) and type a name.
3.
Press the Enter key on the keyboard to set the name.
4.
To name a channel, select the yellow text and type a name.
5.
Press the Enter key on the keyboard to set the name.
Channel naming is cleared by pressing
reset
(see page 36).
When the unit is powered up, channel modes are determined by their preset modes;
all other settings are retained.
After configuring settings with the Dugan Control Panel, it can be disconnected. All
settings are retained and the unit continues to function on its own.
Channel Pane
The Channel Pane contains the controls and indicators for each channel. Channels
are always in one of three modes:
man
,
auto
, or
mute
. The active channel mode illu-
minates. All transitions are made with a smooth, rapid fade. Select a channel mode
by pressing the individual mode buttons or the Master
PRESET
button.
Figure 3-3 shows a typical system: channels 1–4 in
auto
with ambient noise
,
and chan-
nels 5–8 in
mute
.
Summary of Contents for Dugan-MY16
