Version
Document
Lang.
Page
16.06.2021
3050-3056 BJÖRK touch-free dispenser, soap / disinfectant
Maintenance and service manual
ENG
4
of 12
DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • +45 86 41 57 11 • www.dandryer.com • [email protected]
7. Mount the liquid
container by
gently pushing it
into the groove
on the pump
housing.
8. Pull the silicone tube downwards and place the
outlet nozzle in the slot. Make sure that the collar
is located
under
the pump housing.
If the outlet nozzle
is placed or instal-
led incorrectly, the
pump will not func-
tion or its function
will be decreased.
Make sure that the
collar is located
under
the pump housing.
9. Close the fl ap on the front of the pump
housing by turning clockwise and lifting it
approximately 1 cm so the two pins fall into
the guide holes.
11. Open the door to the battery box.
(If you have chosen to use external power
supply, skip to page 6).
10. Remove the
protective
plastic plug.
Installation and connection (continued):
