background image

Version

Document

Lang.

Page

16.06.2021

3050-3056 BJÖRK touch-free dispenser, soap / disinfectant

Maintenance and service manual

ENG

of 12

DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • +45 86 41 57 11 • www.dandryer.com • [email protected]

Preface  

 

 

 

2

General  

 

 

 

2

Intended product use 

 

 

2

The supplier’s product liability 

 

2

Safety and warnings 

 

 

2

Installation and connection 

 

3

External power supply (optional)  

6

Liquid fi lling 

 

 

 

7

Battery exchange 

 

 

9

Regular maintenance 

 

 

10

Trouble shooting 

 

 

10

Technical specifi cations  

 

11

Dimensions 

 

 

 

11

Spare parts 

 

 

 

12

Table of contents:

Preface

Thank you for purchasing your equipment from 
DAN DRYER A/S and congratulations on your 
new soap/disinfectant dispenser. If you use and 
maintain your dispenser according to our manu-
al, it will work to your satisfaction for many years.

General

The dispenser must only be installed and used 
in accordance with these instructions and safety 
precautions. All service staff  who work with 
installation, servicing and repair of the dispenser 
must have read and understood this manual. If 
you have questions concerning the use or main-
tenance of your dispenser, you are welcome to 
contact us.

Intended product use

The dispenser is designed for installation in indo-
or public or private restrooms and may only be 
used for liquid soap/disinfectant.

The supplier’s product liability

DAN DRYER A/S accepts no responsibility if the 
dispenser  is installed, used, modifi ed or compo-
sed otherwise than specifi ed in this manual.

Warning!

If the dispenser is not installed and connected 
properly it can be dangerous to use due to the 
risk of electric shock. Always follow the installa-
tion instructions in this manual.
All service staff  who work with servicing and 
repairing of the dispenser must have read and 
understood this manual.

Warning!

During cleaning, inspection, service etc. the 
dispenser must always be disconnected from 
the main power supply.

Safety precautions:

Maintenance work requiring dismantling of the 
dispenser must only be carried out by staff  with 
proper training.

Safety precautions:

Check before use that:
•  the dispenser is securely attached to the wall.
•  the dispenser is properly cleaned.
•  the dispenser is not damaged or otherwise in 

disorder.

Summary of Contents for 3050













Reviews: