manualshive.com logo in svg

DAN DRYER 3050, Maintenance And Service Manual, Page: 7 / 12

Share
Download
DAN DRYER 3050 Maintenance And Service Manual Download Page 7

Version

Document

Lang.

Page

16.06.2021

3050-3056 BJÖRK touch-free dispenser, soap / disinfectant

Maintenance and service manual

ENG

7 

of 12

DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • +45 86 41 57 11 • www.dandryer.com • info@dandryer.dk

Liquid fi lling:

4.  Remove the cap 

and fi ll the contai-
ner with appropria-
te liquid soap / gel 
disinfectant.
Refi t the cap and 
wipe any spilled 
soap.

1.  Open the front cover 

using the supplied 
square key.

2. 

Open the fl ap on the front of the pump hou-
sing by gently lifting it approximately 1 cm 
and turn it anticlockwise.

3.  Remove the liquid container by gently pul-

ling it out of the pump housing.

See next page for 
further instructions....

5.  Mount the liquid 

container by 
gently pushing it 
into the groove 
on the pump 
housing.

6.  Pull the silicone 

tube downwards 
and place the 
outlet nozzle in the 
slot. Make sure 
that the collar is 
located 

under

 the 

pump housing.

Summary of Contents for 3050













Reviews:

No comments