4M Stop Action Camera Manual
PRELIMINARY
57
Power
Power will not be provided on the Camera Link connector. The camera will receive
power through a separate cable. Camera manufacturers will define their own power
quirements.
Camera Link Video Timing
Figure 22: Pantera SA 4M60 Standard Timing (Input and Output Relationships)
connector, current, and voltage re
IMPORTANT:
This camera uses the
falling
edge of EXSYNC
to trigger line readout,
unlike previous DALSA
cameras, which used the
rising edge.
twPR_LOW
tPR_INT
twPR_LOW
thPR
tLF
tLVAL_LOW
tLINE
tLVAL_LOW
tLINE
tFL
tREADOUT
tOVERHE
tTRANSFER
tREADOUT
tFRAME PERIOD
twSYNC_INT
twSYNC
twSYNC_INT
tFRAME PERIOD
twSYNC
1
N
STROBE
EXSYNC
FRAME VA LID
LINE VALID
DATA
PIXEL RESET
DVAL
twSYNC
e EXSYNC
lse. When in SMART EXSYNC
h i
ater
tosites to be properly
µs
12
The minimum width of th
pu
mode, the minimum widt
allow for the pho
s gre
to
reset.
twSYNC_INT
Is the the integration time when the
“SMART EXSYNC” feature is available
and turned on. Note that the
imu
min
m
time is necessary to guarantee proper
operation.
µs
10
t FRAME
PERIOD
The minimum frame time made up of
tTransfer, tREADOUT plus
tOVERHEAD
ms 16.129
1000.0
tTRANSFER
The time from the reception of the
falling edge of EXSYNC to the rising
edge of FVAL.
µs
58 (
clm 15
/
16
)
82 (
clm
2
/
3
)
tREADOUT
Is the time that frame valid is high
µs
16000 (
clm 15
/
16
,
sot 320)
32000 (
clm
2
/
3
)
DALSA 03-32-10121-09
