Dalsa Spyder3 SG-11-01k80-00-R, User Manual

Page: 77 / 93

Spyder3 GigE Vision User’s Manual
DALSA 03-032-20027-02
77
Mnemonic Syntax Parameters Description
enable input LUT
eil
i
Enable input LUT, where:
0
: Off
1
: On
(4k model only.)
end of line sequence
els
i
Sets the end-of-line sequence:
0
: Off
1
: On
enable pixel coefficients
epc
i i
Sets whether pixel coefficients are
enabled or disabled.
The first parameter sets the FPN
coefficients where
i
is:
0
= FPN coefficients disabled
1
= FPN coefficients enabled
The second parameter sets the PRNU
coefficients where
i
is:
0
= PRNU coefficients disabled
1
= PRNU coefficients enabled
get camera model
gcm
Reads the camera model number.
get camera parameters
gcp
Reads all of the camera parameters.
get camera serial
gcs
Read the camera serial number.
get camera version
gcv
Read the firmware version and FPGA
version.
get fpn coeff
gfc
x
Read the FPN coefficient
x
= pixel number to read in a range
from
1
–
sensor pixel count
.
get help
gh
Returns all of the available “get”
commands.
get input LUT
gil
Display the current LUT set number.
(4k model only.)
get line
gl
x x
Gets a line of video (without pixel
coefficients applied) displaying one
pixel value after another and the
minimum, maximum, and mean value
of the sampled line.
x
= Pixel start number
x
= Pixel end number
in a range from
1
to
sensor pixel
count
.
get line average
gla
x x
Read the average of line samples.
x
= Pixel start number
x
= Pixel end number
In a range from
1
to
sensor pixel
count
.
get prnu coeff
gpc
x
Read the PRNU coefficient.
x
= pixel number to read in a range
from
1
–
sensor pixel count
.