Dalsa Spyder3 SG-11-01k80-00-R, User Manual

Page: 61 / 93

Spyder3 GigE Vision User’s Manual
DALSA 03-032-20027-02
61
Message Description
Message Description
Error 02:
Unrecognized
command> Command is not available in the current access level or it is not a valid
command.
Error 03: Incorrect
number of
parameters>
Error 04: Incorrect
parameter value> This response returned for
·
Alpha received for numeric or vice versa
· Not an element of the set of possible values. E.g., Baud Rate
· Outside the range limit
Error 05: Command
unavailable in this
mode> Command is valid at this level of access, but not effective. Eg line rate
when in smart EXSYNC mode
Error 06: Timeout> Command not completed in time. Eg FPN/PRNU calculation when no
external EXSYNC is present.
Error 07: Camera
settings not saved> Tried saving camera settings
(
RestoreFactorySettings
/
RestoreUserSettings)
but they
cannot be saved.
Error 08: Unable to
calibrate - tap
outside ROI> Cannot calibrate a tap that is not part of the region of interest.
Error 09: The
camera's
temperature exceeds
the specified
operating range> Indicates that the camera has shut itself down to prevent damage from
further overheating.