Shad-o-Scan User Manual, Rev04
32
Shad-o-Scan 3001/4501 X-Ray Detector
Teledyne DALSA
Sensor Control
The Shad-o-Scan Detector controls, as shown by CamExpert, groups the detector-
specific parameters. The features which are underlined link to the paragraph which
describes these features in more detail.
Display Name
Feature
Acc
Description
Exposure Mode
Framerate
RW
The exposure duration time is set using
the Acquisition Frame Rate feature
Exposure
The exposure duration time is set using
the Exposure Time feature
Binning list
Binning 1x1
Read the full array of the image sensor.
No binning performed.
Binning 1x2
Factor 2 vertical binning in sensor
Binning 2x2
Factor 2 vertical binning in sensor and
factor 2 horizontal binning l in FPGA
Binning 4x4
Factor 2 vertical binning in sensor and
factor 2 vertical binning in FPGA.
Additionally, factor 4 horizontal binning
in FPGA
Trigger Mode
Freerunning
RW
Image acquisition is controlled by the
detector
Triggered
Image acquisition is controlled by
external trigger.
Snapshot
Image acquisition is controlled by
external trigger. Snapshot mode has a
double readout mechanism (see Trigger
mode section for detailed timing
diagram)
Read-out Direction Y
Top to Bottom
Pixel data is read out in sensor top to
bottom direction
(default)
Bottom to Top
Pixel data is read out in sensor bottom
to top direction
Read-out Direction X
Left to Right
Pixel data is read out in sensor left to
right direction
(default)
Right to Left
Pixel data is read out in sensor right to
left direction
Full Well Selection
FullWell
RW
Selects the full well of the pixels in the
sensor array
High Full Well
HighFullWell
Large full well capacitor
Low Full Well
LowFullWell
Small full well capacitor
(default)
Horizontal Offset
Horizontal Offset
RW
Horizontal start position for ROI mode;
min 0, max 3072 (for the 3001), max
4608 (for the 4501)
Multiple of 4
Vertical Offset
Vertical Offset
RW
Vertical start position for ROI mode;
min 0, max 64
Multiple of 4
