Shad-o-Scan User Manual, Rev04
6
Shad-o-Scan 3001/4501 X-Ray Detector
Teledyne DALSA
The power requirements of the product, especially the voltage specifications, must be
strictly adhered to or warranty will be void.
No User Serviceable Components
There are no components in this system which need to be replaced, modified, or
adjusted by the end user. Please contact Teledyne DALSA Support for assistance if
needed.
Safety Warning:
Tampering with this product voids the warranty and may degrade
the detectors image quality, resulting in a possibly unsafe condition for (End-)Users.
The system has been designed to minimize the amount of interference it may
generate in an installation. This equipment generates and can radiate radio frequency
energy and, if not installed and operated in accordance with the instructions, may
cause harmful interference to other devices in the area.
Stacking
Teledyne DALSA does not recommend that the user stack the product or use it
adjacent to other equipment. If this arrangement is unavoidable, then the (End-)user
must ensure that there is adequate airflow around the detector and that normal
operation conditions are maintained.
Disposal of Product
The detector contains lead and no batteries. Dispose the unit in accordance with local
regulatory guidelines.
Labels
The type numbers are defined as RD60M**. But in the communication with the
product by means of the firmware (FW), the naming will be CD60M**. This is in line
with the sensor naming i.e. CM60.
