Dalsa ML Series, Manual

Page: 10 / 82

8  The Linea ML Color Camera Linea ML Color Cameras
Typical Power
Dissipation
1
16 W 28 W 21 W
Size 76 mm (W) x 76 mm (H) x 85
mm (D)
97 mm (W) x 140.5 mm (H) x
78.6 mm (D)
97 mm (W) x 140.5 mm (H) x
78.6 mm (D)
Mass < 500 grams < 1.2 kilograms < 1.2 kilograms
Operating Temp +0 °C to +65°C, front plate temperature
2
Optical Interface ML-FC-08K10T ML-HC-16K10T ML-FC-16K04T
Lens Mount M58 x 0.75 mm M90 x 1 mm M90 x 1 mm
Sensor to Camera
Front Distance
12 mm
Sensor Alignment (aligned to sides of camera)
Flatness

y (parallelism)
x
y
z

z
50 µm
100 µm
± 100 µm
± 100 µm
± 250 µm
± 0.4°
Operating Ranges Performance (All models) Notes
Random Noise* < 0.3 DN rms (10 e
-
) typical
Peak Responsivity
Blue
Green
Red
12 DN/(nJ/cm
2
)
13 DN/(nJ/cm
2
)
18 DN/(nJ/cm
2
)
@ 460 nm
@ 525 nm
@ 625 nm
DC Offset 5 DN Can be adjusted as required
Full Well 7,200 e- Typical, single row
PRNU < ±2% 50% of calibration target
DSNU (FPN) < ±2 DN
SEE
Blue
Green
Red
21 nJ/cm
2
19 nJ/cm
2
14 nJ/cm
2
@ 460 nm
@ 525 nm
@ 625 nm
NEE
Blue
Green
Red
16 pJ/cm
2
14 pJ/cm
2
10 pJ/cm
2
RN / Responsivity
@ 460 nm
@ 525 nm
@ 625 nm
Anti-blooming > 100x Saturation
Integral non-linearity < 2%
Notes:
*DN = digital number
1. Power dissipation increases with temperature. See Figure 1: Power and Temperature
2. Camera will shut down when the internal temperature r80 ºC.
Test Conditions unless otherwise specified:
 Note: Specifications are under specified operating conditions and may degrade as temperature limits are
approached.
 Values measured using 8-bit, 1x gain.
 40 kHz line rate.
 Light source: White LED if wavelength not specified.
 Front plate temperature: +45º C.