Dalsa ML Series, Manual

Page: 56 / 82

54  Appendix A: GenICam Commands Linea ML Color Cameras
Display Name Feature Description View
Exposure Time ExposureTime Sets the exposure time (in
microseconds). Can set all or individual
rows. Beginner
Exposure Time
Selector exposureTimeSelector Selects which line the exposure time is
applied to. Beginner
DFNC
All All Exposure time applied to all channels.
Red Red Exposure time applied to red channel.
Green Green Exposure time applied to green channel.
Blue Blue Exposure time applied to blue channel.
Direction Source sensorScanDirectionSource Direction determined by value of: Beginner
DFNC
Internal Internal SensorScanDirection
Line 2 GPIO2 Pin 6 (Low: forward, high: reverse)
RotaryEncoder Encoder Rotary encoded (must be selected in
Digital IO Control | Trigger Source)
Internal Scan
Direction sensorScanDirection When ScanDirectionSource is set to
Internal, determines the direction of the
scan Beginner
DFNC
Forward Forward Forward scan direction.
Reverse Reverse Reverse scan direction.
Gain Selector GainSelector Selects which gain is controlled when
adjusting gain. Beginner
Blue Blue Gain and offset applied to blue channel.
Green Green Gain and offset applied to green channel.
Red Red Gain and offset applied to red channel.
All Rows All Gain and offset applied to all channels.
System Gain System System gain will apply the gain value
while maintaining the existing gain ratios.
Gain Gain Sets the gain as per the gain selector
setting. Beginner
Black Level BlackLevel Controls the black level as an absolute
physical value. This represents a DC
offset applied to the video signal, in DN
(digital number) units. The value may be
positive or negative. Beginner
Balance White
Auto BalanceWhiteAuto Initiates white balance bringing all colors
equal to the color with the high value
using the color gains Beginner
Line Spatial
Correction sensorLineSpatialCorrection Sets the number of rows each color is
delayed to establish spatial alignment.
Must stop acquisition to change. Beginner
DFNC
Image Distortion
Correction Mode imageDistortionCorrectionMode Used to enable parallax correction.
Acquisition must be stopped to modify. Expert
DFNC
Off Off Disabled.
Active Active Enabled.
Image Distortion
Correction
Algorithm imageDistortionCorrectionAlgorithm Read only. Indicates the type of
correction algorithm used i.e Parallax Expert
DFNC