Linea SWIR GigE Series Camera
Operational Reference
•
79
GigE Vision Transport Layer Control Category
The Linea SWIR GigE Camera Vision Transport Layer Control as shown by CamExpert, shows
parameters used to configure features related to GigE Vision specification and the Ethernet
Connection. Parameters in gray are read only, either always or due to another parameter being
disabled. Parameters in black are user set in CamExpert or programmable via an imaging
application.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage—not typically required by end user applications.
Figure 43: GigE Vision Transport Layer Features
GigE Vision Transport Layer Feature Descriptions
The following table describes the parameters, view attribute and minimum camera firmware
version required. The Device Version & View column will indicate which parameter is a member of
the DALSA Features Naming Convention (denoted by DFNC), versus the GenICam Standard
Features Naming Convention (SFNC is not shown).
The Device Version number represents the camera software functional group, not a firmware
revision number. As the Linea SWIR GigE camera’s capabilities evolve the device version will
increase, identifying the supported function package. New features for a major device version
release will be indicated by
green text
for easy identification.