30
•
Operational Reference
Linea SWIR GigE Series Camera
Load Configuration
UserSetLoad
Loads the camera configuration set specified by the
User Set Selector feature to the camera and makes it
active. (W)
1.00
Beginner
Save Configuration
UserSetSave
Saves the current camera configuration to the user
set specified by the User Set Selector feature. The
user sets are located on the camera in non-volatile
memory. (W)
1.00
Beginner
Device Built-In Self Test
deviceBIST
Command to perform an internal test which will
determine the device status. (W)
1.00
DFNC
Beginner
Device Built-In Self Test
Status
deviceBISTStatus
Return the status of the device Built-In Self Test.
Possible return values are device-specific.
1.00
Beginner
Passed
Passed No failure detected.
Firmware Update Failed
FirmwareUpdateFailure Last firmware update operation failed.
FPGA Cyclic Redundancy
Check Failed
FPGA_CRC_Failure FPGA cyclic redundancy check failed.
Unexpected Error
Unexpected_Error Switched to recovery mode due to unexpected
software error.
Device Built-In Self Test
Status All
deviceBISTStatusAll
Return the status of the device Built-In Self Test as a
bitfield. The meaning for each bit is device-specific.
1.00
DFNC
Beginner
Device Reset
DeviceReset
Resets the device to its power up state. (W)
1.00
Beginner
Device Temperature
Selector
DeviceTemperatureSelector
Select the source where the temperature is read.
1.00
Beginner
Device Temperature
DeviceTemperature
The temperature of the selected source in degrees
Celsius
1.00
Beginner
Device ID
DeviceID
Displays the device’s factory set serial number.
1.00
Invisible
Calibration Date
deviceCalibrationDateRaw
Date when the camera was calibrated.
1.00
DFNC
Invisible
Device Acquisition Type
deviceAcquisitionType
Displays the Device Acquisition Type of the product.
(RO)
1.00
DFNC
Invisible
Sensor
Sensor The device gets its data directly from a sensor.
Device TL Type
DeviceTLType
Transport Layer type of the device.
1.00
Invisible
GigE Vision
GigEVision GigE Vision Transport Layer
Device TL Version Major
DeviceTLVersionMajor
Major version of the device’s Transport Layer.
1.00
Invisible
Device TL Version Minor
DeviceTLVersionMinor
Minor version of the device’s Transport Layer.
1.00
Invisible
Power-up Configuration
Selector
UserSetDefaultSelector
Selects the camera configuration set to load and
make active on camera power-up or reset. The
camera configuration sets are stored in camera
non-volatile memory. (RW)
1.00
Invisible
None
None Keep Internal configuration.
Factory Setting
Default Select the Factory Setting values as the Power-up
Configuration.
UserSet1
UserSet1 Select UserSet1.
UserSet2
UserSet2 Select UserSet2.
DFNC Major Rev
deviceDFNCVersionMajor
Major revision of Dalsa Feature Naming Convention
which was used to create the device’s XML. (RO)
1.00
DFNC
Invisible
DFNC Minor Rev
deviceDFNCVersionMinor
Minor revision of Dalsa Feature Naming Convention
which was used to create the device’s XML. (RO)
1.00
DFNC
Invisible
