Dalsa Linea ML ML-FM-08K30H Manual Download

Page: 21 / 83

Linea ML Multiline Monochrome / HDR CMOS Cameras

•

Control Buttons: The display pane includes CamExpert control buttons. These are:

Acquisition control button:

Click once to start live grab, click again to stop.

Single frame grab:

Click to acquire one frame from device.

Trigger button:

With the I/O control parameters set to Trigger Enabled, click to send a

single trigger command.

CamExpert display controls:

(these do not modify the frame buffer data)

Stretch image to fit, set image display to original size, or zoom the

image to virtually any size and ratio.

Histogram / Profile tool:

Select to view a histogram or line/column profile during live

acquisition or in a still image.

Output Message Pane: Displays messages from CamExpert or the device driver.

At this point you are ready to start operating the camera, acquire images, set camera functions,

and save settings.

Summary of Contents for Linea ML ML-FM-08K30H




















































































Search results

Summary of Contents for Linea ML ML-FM-08K30H

Reviews:

Related manuals for Linea ML ML-FM-08K30H

Brands by name

Popular brands

Dalsa Linea ML ML-FM-08K30H, Manual

Search results

Summary of Contents for Linea ML ML-FM-08K30H

Reviews:

Related manuals for Linea ML ML-FM-08K30H

Brands by name

Popular brands