22
Linea ML Multiline Monochrome / HDR CMOS Cameras
can accept any voltage b12 Volts and +24 Volts with a ± 5% tolerance. If there is a
voltage drop between the power supply and camera, ensure that the power supply voltage is at
least 12 Volts plus this voltage drop. The camera input supply voltage can be read using
CamExpert. Refer to the section on Voltage & Temperature Measurement for more details.
Mating GPIO Cable Assembly
Teledyne DALSA makes available for purchase an optional GPIO breakout cable (12-pin Female
Hirose to 13-Pos Euro Block), as shown in the following drawing. Use accessory number #CR-
GENC-IOP00 to order.
External Input Electrical Characteristics
Sw itching Voltage
Input Level Standard
Low to high
High to low
Input Im pedance
3.3V TTL
2.1V
1V
10K Ω
External Input Timing Reference
Input Level
Standard
Maxim um Input
Frequency
Minim um Pulse
Width
Input Current
Maxim um Signal Propagation Delay @
60
o
C
3.3V TTL
20 MHz
25 ns
<250 µA
0 to 3.3V
<100 ns
3.3V to 0
<100 ns
External Output Electrical Characteristics
