20
Linea ML Multiline Monochrome / HDR CMOS Cameras
Setting Up for Imaging
Figure 8. Camera I / O Connectors: 8K (left) & 16K (right)
Camera I / O Connectors
1) Factory use only.
2) Data and control connectors: LC (8K) and CX4 AOC (16K).
3) LED status indicators.
4) Power and GPIO connectors: +12 V to +24 V DC ± 5% tolerance, Hirose 12-pin circular.
Powering the Camera
WARNING: When setting up the camera’s power supply follow these guidelines:
Apply the appropriate voltages of b12 V to +24 V with a ± 5% tolerance. Incorrect
voltages may damage the camera.
Before connecting power to the camera, test all power supplies.
Protect the camera with a 3 amp slow-blow fuse between the power supply and the camera.
Do not use the shield on a multi-conductor cable for ground.
Keep leads as short as possible in order to reduce voltage drop.
Use high quality supplies in order to minimize noise.
