Falcon 1.4M100 Camera Manual
12
1.4
Camera Cosmetic Specifications
1.4.1
Sensor Cosmetic Specifications
The following table highlights the current cosmetic specifications for the DALSA sensor
inside the Falcon 1.4M100 camera. The monochrome sensor has 1.4 megapixels (1400 x
1024) and global shuttering.
Blemish Specifications
Maximum Number of Defects
Hot pixel defects
1
Single pixel defects
100
Clusters defects
No limit (see note)
Spot defects
0
Column defects
0
Row defects
0
Definition of cosmetic specifications
Hot pixel defect
•
Pixel whose signal, in dark, deviates by more than 400DN (10-bits) from its
neighboring pixels.
Single pixel defect
•
Pixel whose signal, at nominal light (illumination at 50% of the linear range), deviates
by more than ±30% from its neighboring pixels.
Cluster defect
•
A grouping of
at most
5 pixel defects within an area of 3*3 pixels.
Spot defect
•
A grouping of
more than
5 pixel defects within an area of 3*3 pixels.
Column defect
•
A column which has more than 8 pixel defects in a 1*12 kernel.
•
Column defects must be horizontally separated by 3 good columns.
Row defect
•
A horizontal grouping of more than 3 pixel defects between at least 2 good pixels on
both sides, where single good pixels between 2 defective pixels are considered as
defective.
Test conditions
•
Digital gain – 1X.
•
Nominal light = illumination at 50% of saturation.
•
Frame Rate = 100fps
03-032-20024-01
DALSA
