36
Rev. 1.0.1 | © 2018 Dallmeier | www.dallmeier.com
MDF5400HD-DN Commissioning
B-❻
➡
Mount the encoder unit on the inner side of the ceiling panel using 4 suitable screws (e.g. chipboard screws with a
diameter of 3.5 mm
) so that
the encoder unit is secured against slipping (e.g. when replacing the ceiling panel).
NOTICE:
Pay attention to the suitable screw length, depending on the panel thickness, in order not to penetrate the ceiling panel on the later visible side.
Ø 3.5 mm
2 mm
