dallmeier DOMERA DDZ4010 HS/HD Series, Installation And Configuration Manual

Page: 22 / 184

DDZ40(10)(20)-YY/HS/HD
www.dallmeier.com 22
6.3 Video Standard (PTZ Dome Camera)
Countries and territories use different broadcasting television systems.
To ensure a correct video signal transmission, the device must be set to the appropriate
video standard for your country.
Depending on the ordered device type the video standard of the PTZ dome camera is
configured for “NTSC” or “PAL” countries.
Notice
The video standards of the IP I/O interface and the PTZ dome camera
have to be identical (see section “ Video Standard ” on page 63).
As of software version V1.24 (PTZ dome camera) the PTZ dome camera
automatically inherits the video standard set at the IP I/O interface (via
WebConfig).

If required, set the video standard (as stated in the order) with the DIP switch S5
(see Fig. 5-12 ).
Video standard
S5
1 2 3 4
NTSC OFF
Baud rate
PAL ON
Table 6-3 Video standard (PTZ dome camera)