dallmeier DOMERA DDZ4010 HS/HD Series, Installation And Configuration Manual

Page: 150 / 184

DDZ40(10)(20)-YY/HS/HD
www.dallmeier.com 150
14.3.10.3 View Angle
VIEW ANGLE SETUP
Flip :ON
Tilt Limit : 00
Left Pan Limit :000.0
Right Pan Limit :000.0
Enable Pan Limit :OFF
Apply Auto Pan :OFF
Save and Exit
Flip OFF
: The PTZ dome camera only moves up to 90° vertically.
ON
: The PTZ dome camera moves up to 180° vertically.
The flip feature is useful when you need to track someone who walks
directly beneath the PTZ dome camera and continues on the other side.
Tilt Limit
Limitation of tilt range:
-5
° to
+10
°
Helpful if ceiling is visible at wide angle settings
Pan Limit
If the PTZ dome camera is installed near a wall, it can be useful to limit the panning
range.
In this case, proceed as follows:

Position the PTZ dome camera under 90° vertically.

Select
Left Pan Limit
.

Click iris + .

Adjust the left pan limit (see section “ Edit Position ” on page 111).

Click iris + .

Select
Right Pan Limit
.

Click iris + .

Adjust the right pan limit (see section “ Edit Position ” on page 111).

Click iris + .

Set
Enable Pan Limit
to
ON
to enable the pan limit function.

Set
Apply Auto Pan
to
ON
to apply the pan limits to the auto pan function (endless
panning).
Set the pan limit first before setting positions presets, scans and patterns.
When you enter the pan limit mode, the PTZ dome camera moves to 90° vertically auto-
matically if the PTZ dome camera is positioned over 90° vertically.