dallmeier DF4910HD-DN Installation And Configuration Manual Download Page 22

Page: 22 / 104

DF4910HD-DN | DDF4910HDV-DN-IM/-SM

www.dallmeier.com

6 Installation and Commissioning

6.1

Box Camera

The installation and commissioning of the unit may only be carried out by qualified per

sonnel.

WARNING

Electric shock hazard

Danger of death or serious injury



Always disconnect the PoE switch or the separate power supply unit

from the mains socket (pull out the power plug) before connecting or

disconnecting the device.

Notice

The device can be powered via PoE (Power over Ethernet, Class 0) OR

supplied with a separate 12 V DC power supply unit.
However, always beware not to use both power sources simultaneously.

In order to comply with UL’s requirements, always use a UL-certified, Limited Power

Source (LPS) Class 2 power supply unit when operating the device with a separate power

supply unit.

6.1.1

Attaching the Lens

Lens

Lens thread

Max. 5 mm

Fig. 6-1

Notice

Possible damage to the sensor

The length of the lens thread plus any protruding parts must not exceed

5 mm.



If using a C-mount lens, you have to screw a C-/CS-mount adapter ring

(5 mm) between the lens and the camera.

Summary of Contents for DF4910HD-DN









































































































Search results

Summary of Contents for DF4910HD-DN

Reviews:

Related manuals for DF4910HD-DN

Brands by name

Popular brands

dallmeier DF4910HD-DN, Installation And Configuration Manual

Search results

Summary of Contents for DF4910HD-DN

Reviews:

Related manuals for DF4910HD-DN

Brands by name

Popular brands