DF3000IP(-DN) / DF3000IP(-DN) CasinoCam
®
34
Dallmeier electronic
¾
Click on Scheduler ....
All areas in the weekly plan which
are shown as light colored are
active areas (pre-set).
Within this time period all selected
messages will be sent to the
corresponding alarm host.
¾
Click on the not active button.
¾
Move the mouse pointer over
the top left corner of the desired
time area.
¾
If you move the position of the
crosshairs whilst holding the
mouse button, a dark rectangle
will be opened.
Dark areas are inactive time areas.
The smallest time unit you can set is 15 minutes.
In the example shown here the time from 02:00 to 07:15 has been marked as not active.
Within this time period no messages will be sent to the alarm host.
Undoing the selection
To undo the marking, click on the active button and trace a rectangle over the inactive
area.
You also can remark certain sections within the inactive area as active by tracing the particular
section.
Active and inactive time areas defined using the above-mentioned method are valid for the
entire year.
¾
If no exceptions are to be made (see below) click on OK.
Fig. 10-8
Fig. 10-9
Fig. 10-10
