DF3000IP(-DN) / DF3000IP(-DN) CasinoCam
®
27
Dallmeier electronic
9.6
Relays
NOTE
This function is not supported by the DF3000IP(-DN).
NOTE
This function can be used with a RS485 contact interface only.
This dialog allows the Contact OUT relays to be configured via the user interface.
¾
Open the Relay X dialog via Common settings > Relays ... > Relays X.
Function
¾
Set Function to Error.
¾
Activate the Camera Failure
checkbox.
The relay will be switched in case
of a camera failure.
Holding time
¾
Set the Timer to On to activate the holding time.
¾
In the Time (sec.) field, enter the relay activation time in seconds.
Type
¾
The Type field allows you to decide whether the relay should act as NC / Normally
Closed (break contact) or as NO / Normally Open (make contact).
¾
Click OK to apply your settings.
9.7
Password
¾
Open the Change password dialog via Common settings > Password ....
¾
Enter the current password.
¾
Enter the new password and
confirm it by entering it a
second time.
¾
Confirm with OK.
NOTE
For security reasons the new password should consist of at
least 8 characters. Do not use any conventional expressions
or names, but instead use a combination of numbers and letters.
Fig. 9-10
Fig. 9-9
