4
0.8 Improper use
Using fuels not foreseen in this manual is an improper use.
0.9 Fuels
The combustible permitted are mentioned in the technical Normative EN 303-5, in particular:
Natural wood like:
A-
wood in pieces
B1-
wood shavings (minimum dimension about 5x5x5 cm)
C-
pressed wood (minimum dimension about 5x5x5 cm)
Fossil combustibles (minimum dimension about 5x5x5 cm) like
a-
Soft coal
b-
Brown coal
c-
Coke
d-
Anthracite
0.10 Warranty and Responsibility
The warranty of the machine, except in case of different indications, accepted when the
purchase conditions era agreed upon, starts from the date when the warranty certificate, which
is enclosed to each machine, go back to the manufacturer after being properly filled in.
The warranty forfeits in case the machine damages depend on:
•
Transport and/or handling (if to the Customer’s charge);
•
Errors of assembly on the installer’s behalf;
•
Lack of maintenance (as prescribed into this manual) ;
•
Failures and/or breaks not due to the malfunction of the machine itself;
•
Reasons not due to the manufacturer
The warranty is valid only to the original customer and only when he is completely owner of
the machine.
Any controversy between D'Alessandro Termomeccanica and the purchaser are settled by an
arbitration; in case of non-agreement upon the arbitration board the place of jurisdiction is
Chieti.
The above mentioned points are contained in the general conditions of sale, which are an
integral part of the purchase agreement. Refer to the general conditions of sale also for cases
not mentioned in this document.
The warranty or the responsibility of the manufacturer can not be called upon in case of
damage to people and/or things, if the damage depends on one of the following reasons:
1) Incorrect installation of the machine
2) Improper use of the machine
3) Alterations of the machine
0.11 Copy of the DECLARATION of CONFORMITY
The Declaration of Conformity is enclosed to the documentation supplied with the machine.
