DLM
Single Channel
BUS
Device Manual
EASY-BUS
FW 1.2
Made in Italy
Rev. 2018-07-23
pag. 3/11
➢
installation
To set the product, follow the instruction on the picture below:
1) connect the LED in the output terminal blocks “OUT” of the device.
2) connect the LOCAL COMMAND to the terminal blocks “INPUT” and / or connect the BUS COMMAND to the terminal block “DALI or DMX” of the
device.
3) connect the power supply (12-24 Vdc or 12-48Vdc depending on the dimmer model) to terminal blocks “DC IN” of the device.
DLM LINE 1CV DALI
DLM LINE 1CV DMX
Examples of local commands and BUS command (DALI or DMX) connection.
DLM 1248 singolo canale BUS
LED DRIVERS
DALCNET S.r.l.
Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy
Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy
Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453
VAT: IT-04023100235
[email protected] www.dalcnet.com
SWITCHING
SUPPLY
+-
Vout
L N
230V
DALI
DC IN
N.O PUSH
BUTTON
DALI
In: 12-48V
Out: max 8A
DC IN
OUT
DALI
D A DA
INPUT
COM
0-10V
COMMAND
DMX
In: 12-48V
Out: max 8A
DC IN
OUT
DALI
D A DA
INPUT
COM
1-10V
COMMAND
DMX
In: 12-48V
Out: max 8A
DC IN
OUT
DALI
D A DA
INPUT
COM
POTENTIOMETER
IN 0V
IN 0V
1 3 2
1 3 2
DLM12 24 -1CV-DALI
In: 12-24V
Out: 10A
DC IN
OUT
DALI
D A DA
INPUT
COM
DLM12 48 -1CV-DALI
In: 12-48V
Out: 6,5A
DC IN
OUT
DALI
D A DA
INPUT
COM
DLM12 24 -1CV-DMX
In: 12-24V
Out: 10A
DC IN
OUT
DMX
INPUT
COM
DLM12 48 -1CV-DMX
In: 12-48V
Out: 6,5A
DC IN
OUT
DMX
INPUT
COM
