DLM
Single Channel
BUS
Device Manual
EASY-BUS
FW 1.2
Made in Italy
Rev. 2018-07-23
pag. 6/11
➢
PUSH MENU’
•
FUNCTIONS AVAILABLE
- MINIMUM VALUE OF DIMMING
- POWER-ON RAMP (FADE IN)
- POWER-OFF RAMP (FADE OUT)
•
ACCESS TO MENU’
When you turn-on the LED dimmer, the output is set at 100% and the minimum of dimming is at 1%.
To access the device menu, click the push button 15 times in 5 seconds-time.
When the Load flashes, you are in “MENU 1”.
•
MENU
’
1
–
MINIMUM VALUE OF DIMMING
Every single click make it changing the minimum value of dimming
There are six levels of minimum: 0,1%, 1%, 5%, 10%, 20%, 30% and 100%
After setting the minimum value of dimming press long to confirm.
A double flashing confirms the storage and you can go to “MENU’2”
Note: if you set the minimum level to 100%, once the setting is confirmed, the device automatically exits the MENU.
•
MENU’
2
– POWER-ON RAMP
(FADE IN)
Every single click make it changing the power-on ramp
There are five levels of power-on ramp (FADE IN): instantaneous, 1 second, 2 seconds, 3 seconds, 6 seconds.
After setting the FADE IN press a long to confirm.
Three flashes confirm the storage and you can go to “MENU’3”
•
MENU’
3
– POWER-OFF RAMP (
FADE
OUT)
Every single click make it changing the power-off ramp
There are five levels of power-off ramp (FADE OUT): instantaneous, 1 second, 2 seconds, 3 seconds, 6 seconds.
After setting the FADE OUT press long to confirm.
Three quick flashes confirm the storage and you go out from the “DEVICE MENU’”
When you are out of the Menu’, the Lamp which is connected to the LED Dimmer turns on at the minimum level of dimming previously set.
DLM 1248 singolo canale BUS
LED DRIVERS
DALCNET S.r.l.
Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy
Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy
Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453
VAT: IT-04023100235
[email protected] www.dalcnet.com
N
E
W
P
U
S
H
M
E
N
U
