MAXICUT
Page 8
Hydraulics
Prior to any repair work on the hydraulics unit, the machine's undercarriage must
be lowered, the pressure must be removed from the unit, the engine must be
switched off and the ignition key must be removed.
Hydraulic connections must be cleaned thoroughly before connecting. When
connecting the hydraulic hoses to the tractor's hydraulics, ensure that the
pressure has been removed from the hydraulic system.
After repairs on the hydraulic system have been completed, all air must be
thoroughly removed from the system.
Check the hydraulic hoses regularly for defects such as tears, cracks, wear or
damage. Defective hoses must be replaced immediately.
Avoid spilling oil on the ground. If this should happen anyway, it should be
collected and sent for destruction.
Clean hands thoroughly after skin contact with oil and grease. Oiled clothing
should be removed immediately as it is harmful to the skin.
Hydraulic oil that flies out under high pressure can penetrate through the skin
and cause serious injuries. Seek professional medical assistance immediately in
the event of any injury.
Mounting
There is a risk of crushing when mounting. People must not be positioned
between the machinery and the tractor or between the parts that are being
connected.
Maintenance and repair
The machine must be properly supported while undertaking all repair and
maintenance work, the tractor and machine must have brakes properly
activated, the engine must have been turned off and the ignition key removed.
Tighten all screw fittings after a few hours of use. All screw fittings must be
checked at regular intervals and tightened when necessary. Check cotter pins
and bolts to avoid breakdowns.
Oil, grease and filters shall be disposed of in accordance with the applicable
environmental legislation.
Driving on roads
When driving on public roads, all safety arrangements and warnings required by
law must be mounted and tested. The driver is responsible for the correct use of
lights and traffic signs in accordance with traffic laws.
Summary of Contents for MAXICUT 260 Series
