MAXICUT
Page 21
Troubleshooting
Problem
Cause
Remedy
The right side is
pulling too much
The pull is too weak
Align horizontal pull (see "Tensile
Alignment")
Too much water
Divide the water equally between
each of the 2 water containers
The left side is
pulling too much
The pull is too strong
Align pull and main frame (see
"Tensile Alignment")
Too much water
Divide the water equally between
each of the 2 water containers
The blades are not
cutting enough
The drum is not heavy
enough.
Fill the containers with more
water
The field/ground is too
wet
Wait until the field is more dry
The wheel frame
touches the ground
Raise the wheels up
Summary of Contents for MAXICUT 260 Series
