MAXICUT
Page 16
Settings
MAXICUT is incredibly easy to work with. The machine's design makes it very easy to
set.
It is always necessary to check the ramp slope before use to ensure optimum
utilization of the machine.
Tensile adjustment
To obtain a uniform cut across the crops, the knife drums move horizontally, while the
side frames move with respect to the ground slope.
Fig. 3
Here you can see the MAXICUT 600 at
work. The main frame is horizontal
while the side frame is moving. The
same goes for the MAXICUT 400.
HORIZONTAL
Properly adjusted tensile results in a uniform cultivation of the field, as the drum will
put equal pressure on each of the 2 sections. With a backwards pull, the tractor's lift
arm is too far up and in the future, the tractor's lift arm should be raised.
Summary of Contents for MAXICUT 260 Series
