DVX-1830 Series Sectional
Installation Quick Guide
28 November 2016
DD3396953
Rev 00
201 Daktronics Drive Brookings SD 57006
800.325.8766
www.daktronics.com/support
Page 8 of 8
Embedded Controller
Connect the signal cables to the proper quick-connect jacks on the rear
of the display as necessary. Verify the caps on the jacks are properly
installed if the jacks are not in use.
Figure 27:
Quick Connect Jacks
ETHERNET IN
J33
J35
J31
AUX
LIGHT
TEMP
Light sensor located in border.
Refer to contract-specific
Shop Drawing for details.
Temperature sensor
location to be
determined
Photo
TMP
Ethernet In
DMP
Figure 28:
Embedded Controller Signal Routing (Rear View)
