DVX-1830 Series Sectional
Installation Quick Guide
28 November 2016
DD3396953
Rev 00
201 Daktronics Drive Brookings SD 57006
800.325.8766
www.daktronics.com/support
Page 6 of 8
3.
Route the coiled fiber cables to the next section, connecting at the first fiber patch panel.
4. Route the SATA cables from section to section and connect to the module input. Refer to the Signal
Interconnect Drawing for routing information.
5.
Route the coiled power cables from section to section, connecting to the power harness in the next
section. Refer to the Signal Interconnect Drawing.
Note:
The fiber, power, and SATA connections shown in this guide serve as an example only. Refer to the
Signal Interconnect Drawing and System Riser Diagram for specific routing information.
SATA A
SATA B
Fiber B
Fiber A
Figure 16:
PLR
Figure 17:
Fiber Patch
Panel Jack
Figure 18:
SATA Cable
Figure 19:
SATA Connection
Figure 20:
Power Interconnect
Between Cabinets
Figure 21:
Power Interconnect
Between Cabinets
