Daktronics DSF-600 Series, Manual

Page: 44 / 63

Installing and Configuring a DataProbe iBoot G2 for
Street Furniture
DD2594516 Rev 1
31 July 2013
PO Box 5128 201 Daktronics Drive, Brookings, SD 57006-5128
tel: 800-325-8766 fax: 605-697-4700
www.daktronics.com
Connect:
Function iBoot-G2+ iBoot-Exp
Power V+ Power Out V+ Power In
Feedback I Input O Output
Ground G Ground G Ground
Command O Output I Input
Expansion units (iBoot-Exp) are shipped with a cable for easy connection to the iBoot-G2+. Maximum
cable length is 1000 ft. (305 m) using 22 AWG wire.
Connecting to General Purpose I/O
Function iBoot-G2+ Description
Power V+ Power Out This is +12 VDC power out from the iBoot-G2+ Maximum current
100 mA
Feedback I Input Input for status signals. Dry Contact input or Open Collector.
Ground G Ground Signal Ground for Input and Output
Command O Output 2N3904 NPN Transistor. 100 mA Maximum
Figure 4: G2+ to iBoot-EXP Connections