Daktronics DSF-600 Series, Manual

Page: 42 / 63

Installing and Configuring a DataProbe iBoot G2 for
Street Furniture
DD2594516 Rev 1
31 July 2013
PO Box 5128 201 Daktronics Drive, Brookings, SD 57006-5128
tel: 800-325-8766 fax: 605-697-4700
www.daktronics.com
General Description
The iBoot-G2+ is a network attached, IP addressed, web controlled AC power switch. Anyone with a web
browser can access iBoot-G2+ to perform power On, Off, or Power Cycle (Reboot or Power Burst).
iBoot-G2+ uses two levels of password security. A simple Web browser interface makes it easy to control
power from anywhere in the world with a click of a mouse.
Expansion to Three Outlets
iBoot-G2+ can be linked to two expansion units, iBoot-Exp to control three outlets. All three outlets are
controlled and managed though the iBoot-G2+ web page and CLI. Each outlet is independently
controlled. Each outlet is independently controlled. AutoPing can be used to control the main and
expansion units independently as well.
Hardware Installation
Ethernet Connections
iBoot-G2+ supports 10/100 Ethernet
using the cable supplied, or other
suitable unshielded twisted pair (Cat
5) cabling. Link (amber) and Activity
(green) LEDs on the network connector
indicate when the network connection is
properly established.
Figure 1: iBoot Installation Example
Figure 2: Expansion to Three Outlets