Daktronics DM-100 Gen III, Quick Manual

Page: 6 / 8

Configuring the DM-100 Gen III
for Sapphire Interface Quick Guide
DD2294807
Rev 04
14 September 2022 201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 6 of 8
PoS Settings
1. Press the MENU key.
2. Press the Down Arrow key to reach Display Menu , and then press ENTER .
3. Press the Down Arrow key to reach PoS Settings , and then press ENTER .
LCD Screen Action/Information Shown
POS INTERFACE
SAPPHIRE {}
LINE 1
PRODUCT: XX{}
Use the Up and Down Arrow keys to select SAPPHIRE , and then press ENTER .
Each price is identified by product ID. Use the Up and Down Arrow keys to
select a product ID for line 1, and then press ENTER .
If a line is not used, select NONE .
Complete the steps above for each display line.
PoS Price Offset
1. Press the MENU key.
2. Press the Down Arrow key to reach Display Menu , and then press ENTER .
3. Press the Down Arrow key to reach PoS Price Offset , and then press ENTER .
LCD Screen Action/Information Shown
LN1 PRICE OFFSET
VAL1 +.00 {}
Use the Up and Down Arrow keys to select the amount to offset the price
(in cents).
Press ENTER to move to the next value to offset.
Complete the steps above for each value of every line. Up to three offset
values (VAL1, VAL2, VAL3) may be configured. The adjustments are applied
when showing price 1, 2, and/or 3 as described in Price Options (p.4) .
Note: This is for use with CASH/CREDIT displays. If there is no CASH/CREDIT
display, “VAL1” should be set to “+.00”.
PRICE OFFSETS
NOT ALLOWED
If this message appears, a PoS interface has not been properly configured.
Refer to PoS Settings (p.6) to ensure the correct PoS interface is selected.
POS SETTINGS
ENT TO MODIFY
POS PRICE OFFSET
ENT TO MODIFY