Daktronics BA-1018, Display Manual

Page: 78 / 216

Scoreboard Options 10-1
Section 10: Scoreboard Options
The following options are available for the Daktronics single-section scoreboards to make
them more adaptable to individual scoring and timing needs:
Team name caption kits for certain models
Trumpet horn for football and soccer
Radio control
Portable power pack
10.1 Team Name Captions: Model BA-624-11
Reference Drawing:
Caption Changing .......................................................... Drawing A-44549
The team name caption kit contains hardware for one caption only and consists of an
upper caption retainer, a lower caption retainer, a changeable caption panel, and
screws.
The standard Home and Guest captions are applied directly to the face of the
scoreboard. Team name captions are on changeable panels that fit into retainers
mounted above and below the HOME and GUEST captions. If retainers are not
already present on your scoreboard, attach the retainers included with the caption kit
as shown on
Drawing A-44549 .
To install a changeable panel:
1. Insert the top of the panel into the upper retainer.
2. Lift the panel all the way up into the retainer.
3. Insert the bottom of the panel into the lower retainer.
Reverse this procedure to remove the caption panel.
An optional caption changer is available for installing and removing panels from the
ground. Each caption panel is punched with keyholes. Screw heads on the crossbar
of the caption changer fit into the keyholes. The caption changer pole is extendable,
with a ring tightener to adjust the length. Loosen the ring to extend the pole to the
desired length; tighten the ring for pole use.