Segment Timer Operation
12
5 Segment Timer Operation
Sport Insert: LL-2648 – Code 06
The Sport Insert drawing is located in
Appendix A
.
Reference Drawings:
Insert; LL-2648 Segment Timer Code 06 ...........................................................
DWG-274996
Section 2: Basic Operation (p� 4)
for information on how to start up the
console and use the sport insert. If an insert is lost or damaged, a copy of the insert
drawing can be used until a replacement arrives.
Segment Timer Information
The segment timer is used to time events such as practice sessions. Operation of the
segment timer is determined by 40 segments of pre-programmed length. The segment
timer will count down starting at the segment number that is set as
First Segment
. When
the first segment is completed, the timer will count the preset
Interval Time
and move on
to the next segment. The timer will continue counting segments until the segment number
that is set as
Last Segment
is complete. It then will reset to the segment saved as the
First
Segment
and will either begin counting down or wait for the
<START>
key to be pressed,
depending on the
<AUTO STOP>
to set the segment-
stopping feature.
The
First Segment
and
Last Segment
values can be used to set up specific practice
sessions. For example, the practice session for one sport could be programmed for
5-minute segments on segments 1–10, while another might use 10-minute segments on
segments 11–20. Set the
First Segment
and
Last Segment
values to the desired segment
numbers for the session, and the console will count down each of the segments in order.
It may also be set to either stop on the last segment or loop back to the first segment
segments, again based on the
<AUTO STOP>
setting.
The segment values will be saved when the console is turned off.
Segment Timer Keys
Segment Number & Time
Display
Action
SEGMENT: NN *
TIME EDIT
NN = current setting
SEGMENT: NN
TIME EDIT MM:SS*
NN = current setting
MM:SS = minutes, seconds
Press
<SEG NO • TIME •>
to set individual segment times.
Enter the segment to be edited using the number keys, and
then press
<ENTER*>
.
Enter the time for the segment using the number keys.
Press
<ENTER*>
to move to the next segment time.
Press
<ENTER*>
again to exit the function.
Summary of Contents for ALL SPORT 100
