4
MAN#650508B
Wipe any road grime and oil from around the plug so the area is clean. Use a 3/8
” allen wrench to remove the plug. Have
the sensor ready to thread in so minimal oil is lost. Tighten the new oil temp sensor with a ¾” wrench.
Thread sender into oil pan
Tighten temp sensor with a ¾” wrench
Plug in the sealed two pin connector and route the wires over to the bottom right side frame rail up towards the neck. Use
zip-ties to secure the wire harness along the frame.
Installed oil temp sensor and harness plug
WIRING (plug in connections)
Now you are ready to make the gauge connections. Included in the kit is an adaptor box that allows the kit to directly plug
into the factory harness. The box has several connections which are explained here. The adapter box will lay inside the
fairing behind the speed and tach. The box can be secured to the wiring to prevent rattling.
16 PIN Connector to
Adapter Box
12 PIN Connector to
Speedometer
TO 12V Constant Power
Aux. Switch for Cable
Drive Applications
