DAKEN SPRAYERS
STORAGE
Prepare the sprayer for end-of-season storage by running RV antifreeze through the system. This will keep internal parts
lubricated, protect against corrosion, and keep the unit from freezing.
The sprayer will be damaged if it freezes.
Protect the sprayer from freezing during storage by following the instructions below.
!
CAUTION
- 31 -
PREPARING FOR STORAGE
1.
Add antifreeze
Pour 4 Litres of RV antifreeze into the tank.
Note: RV antifreeze is non-toxic and biodegradable and generally safer for the environment
than automotive antifreeze.
2.
Spray briefly
Turn on the pump motor and squeeze the gun trigger briefly until fluid sprays. Store gun in lance clips. If
equipped, store broadcast lance in stored position to prevent damage.
REMOVING FROM STORAGE
1.
Drain
Drain the antifreeze left in the tank through the tank drain hole into a suitable container.
2.
Flush with water
Fill the tank with fresh water and run through the system. Operate the spray gun until the system
is completely flushed. Be sure to set up containers to capture the antifreeze flush water.
3.
Disposal
Dispose of the antifreeze and flush water properly.
