4/11/2007
6
To change the machine from 1 phase to 3 phase follow the instructions below.
220 Volt 1 Phase
How to wire for 220 Volt 1 Phase:
1. Connect one lead to L1
2. Connect one lead to L3; this must be the neutral wire.
3. Connect ground wire to ground
220 Volt 3 Phase
How to wire for 220 Volt 3 Phase
1. Connect each wire to L1, L2, L3
2. Connect ground wire to ground
440 Volt 3 Phase
To use 440 volt on this machine a step down transformer is required.
Dake part number 300674
Prior to performing any cutting with the machine, it is recommended that the personal
become familiar with the various controls and accessories.
PRECAUTIONS
•
No loose clothing.
•
Eye protection must be worn.
•
All guards must be in position.
•
Table load capacity should be noted and not exceeded.
•
Extra supports may be required for large material or components.
•
Irregular shapes and small objects should be secured by means of a clamp or suitable fixture.
•
Machine and surrounding should be kept free of tools, scrap and foreign objects.
•
Machine should be locked out before making any adjustments.
•
Gloves must be used when uncoiling, coiling and installing band saw blades.
•
Store band saw blades in an area near the machine. This will allow operating personal to use
the proper blade for each operation.
•
Machine is furnished with electrical door interlocks. These interlocks should periodically be
checked for proper operation.
BLADE INSTALLATION
WARNING!!!
Gloves must be worn when changing the blade.
Summary of Contents for F-16
Page 15: ...4 11 2007 15 PARTS BREAKDOWN AND PARTS LIST ...
Page 24: ...4 11 2007 24 ...
